Guide to Replacing Probe Batteries: Precautions for Renishaw, Marposs, and Bolong Models

相关阅读

• CNC machine internal measurement configuration scheme: machining scene x brand——View all recommended brand solutions by processing scenario
• Common problems with mainstream Renishaw models
• Common problems with mainstream Marposs models
• Common problems with mainstream models of Blum Novotest
• Renishaw Probe Maintenance Guide

FAQ Selected Q&A

**Q: What type of battery is used for OMP40-2? **
**Answer: The Renishaw OMP40-2 uses a 1/2AA 3.6V lithium battery (Toshiba ER14335 or equivalent). Renishaw recommends using original batteries (P-BT03-0007) or 1/2AA 3.6V lithium thionyl chloride batteries of the same specification. Non original batteries require confirmation of dimensional tolerance compatibility.

**Q: How often is the probe battery replaced? **
**Answer: * * It depends on the frequency of use. The standby life of OMP40-2 is about 1500 days, with frequent use lasting about 6-12 months. The battery life of Marposs and Polon models is similar. It is recommended to check the battery voltage during regular maintenance of the equipment and replace it in advance.

**Q: Do I need to recalibrate after replacing the battery? **
**Answer: The standard procedure is to perform a calibration after replacing the battery. Although replacing the battery does not change the mechanical structure of the probe, any variables that may arise during the replacement process can be ruled out. After replacing the battery, it is recommended to use O9311 self-test cycle verification for the Marposs VOP series.

Official reservation：jcetech.cn/contact
Consultation Hotline：157-5780-7400 / 132-2194-1413
Shipping and repair addressNingbo Yinzhou R&D Park A2-12B17

Book an Appointment: jcetech.cn/contact
Service Hotline: 157-5780-7400 / 132-2194-1413
Shipping Address: Ningbo Yinzhou R&D Park A2-12B17
Email: jcetech_info@jcetech.cn