Home / System Integration & Automation

System Integration & Automation

Connecting probes and tool setters to MES, robots and production lines: machine adaptation, data feedback, and measurement results that actually enter the process.

MESRobot loadingData loopMachine adaptation
3articles
1sub-columns
15years in the field

An on-machine measurement system only pays back when its result reaches something that acts on it: a tool offset, a machine variable, a robot, or a quality database. This column covers the integration layer between the probe and the rest of the plant.

Typical integration paths are: skip signal and macro variables inside the CNC; tool-offset tables and common variables; a PLC or cell controller over fieldbus; and finally MES or a quality system that stores the measurement with the workpiece serial number.

  • Machine side — skip input wiring, PMC/PLC logic, macro calls and offset write-back.
  • Cell side — probe and tool setter coordination, robot loading, pallet and fixture logic.
  • Data side — what to store per part, how to keep traceability without flooding the network.
  • Broken-tool and wear monitoring — choosing between tool setters, workpiece probes and power monitoring.

Featured

Editor's picks