Home / Laser Interferometer

Laser Interferometer

Machine accuracy testing and acceptance: positioning accuracy, repeatability, ballbar circularity, ISO 230 reports and compensation work.

XL-80ISO 230Pitch compensationBallbar
1articles
2sub-columns
15years in the field

A laser interferometer measures what the machine actually does along each axis: positioning accuracy, repeatability, reversal error, and — with optics — straightness, squareness and angular error. A ballbar adds the dynamic picture: circularity, servo mismatch and backlash under feed.

The two instruments answer different questions. The interferometer gives the static error map that feeds pitch-error and backlash compensation. The ballbar shows how the machine behaves while moving, which is where most contour errors on a machining centre come from.

  • Acceptance — ISO 230-2 test plan, measurement points, environment and warm-up conditions.
  • Compensation — turning the measured error map into pitch-error compensation values, then verifying the result.
  • After a crash — volumetric check sequence, what to re-measure before touching any parameter.
  • Diagnosis — separating mechanical loss of accuracy from thermal drift and from compensation that no longer matches the machine.

Featured

Editor's picks